Kwik Kar of Dallas on St. Francis

Air Conditioning Service

A good air conditioning system is a must in hot weather, humid conditions like rainstorms, when pollution levels are high and for properly defogging your windows (removes moisture in the air). Trust Kwik Kar to keep you cool.

We offer a special air conditioning performance check service to identify any leaks or mechanical problems. Regardless of vehicle manufacturer, our technicians are equipped to diagnose and repair your vehicles air conditioning system.

Take advantage of our A/C service to maximize the output and efficiency of your air conditioning system.

Kwik Kar's Air Conditioning Service includes:

• Inspect system for leaks (hoses, couplings, valves, evaporator, etc.)
• Recover any old refrigerant
• Remove refrigerant and store in an environmentally safe storage and recycling unit
• Evacuate the system - minimum 30 minutes
• Inspect and adjust drive belt tension
• Clean condenser fins if needed
• Remove moisture which can cause a chemical reaction with the refrigerant resulting in corrosion, contamination and eventual system failure
• Test compressor operation
• Fill with proper O.E. amount of refrigerant (refrigerant extra)
• Pressure test and check for leaks
• Check output temperature
• Check proper operations of controls, blower motor and cooling fan (engine)
• Check antifreeze (engine coolant)

Kwik Kar recommends an air conditioning system inspection every 12,000 miles or 12 months.

Brake Service

Your car's brakes work hard. And the job they do is critical to your safety. That's why it's so important for you to be aware of how your brakes work, and to be alert for signs that your brakes need maintenance. Here you'll find an overview of braking systems, and tips to help you know when it's time for brake service. No matter what your brake system needs, Kwik Kar is here to help make sure your car is functioning precisely.

Today's braking systems are composed of a number of integral parts all working together to ensure that your vehicle stops properly. Generally speaking, by depressing the brake pedal, you are telling the master cylinder to compress brake fluid, which in turn sends hydraulic pressure through brake lines that activate your vehicle's brake pads (or shoes). These pads then make contact with spinning rotors (or drums), slowing down or stopping the vehicle. More complex systems use sensors to activate the brake system, but the desired effect is the same.

The parts that make up your vehicle's brake system wear down over time and eventually need to be replaced. The most common brake repair performed is the replacement of brake pads. Whether composed of ceramic, semi-metallic, or organic materials, brake pads erode each time you depress the brake pedal. If the pads wear down too much without being replaced, the metal housing for the pads will make contact with the metal rotors (or drums), which may produce not only a safety issue but a situation where the rotors/drums are required to be replaced as a result of the prolonged contact of metal parts without the pad buffer which can be very costly.

There are several warning signs that your vehicle can give you before your brakes may reach the point of potential failure or extensive repair. Simply using your sense of hearing, sight and touch may alert you to a potential problem.

Below are some of the common questions you should ask yourself concerning your vehicle's brake system:

• Is your brake warning light on when driving?
• Is your brake fluid low, or appear very dirty?
• Do you hear a grinding sound or a squealing sound when you apply the brake pedal?
• Do you feel a pulsation or some sponginess in the brake pedal when it is depressed?
• Does your vehicle steer or pull to one side when braking?

These are the most common signs that can suggest a potential brake system problem that should be addressed immediately. Any other sights, sounds or sensations in the brake system that seem out of the ordinary should also be taken into consideration. Most times, brake system problems will only escalate if disregarded.

• Technicians at Kwik Kar are trained to service today's complex brake systems. They can inspect your vehicle's braking system to ensure that it is functioning properly or to diagnose a problem and offer suggestions and an estimate for repair.
• From brake pad replacement, servicing rotors, replacing brake cylinders, to addressing Anti-Lock Brake System issues, Kwik Kar provides full repair service for all your vehicle's brake components.
• Additionally, we can perform routine maintenance as suggested by your vehicle's manufacturer. Most often this is a brake system flush, which involves the removal of air and moisture from brake lines and the replacement of brake fluid. Whatever your vehicle's brake system needs, Kwik Kar can perform the service to help ensure its proper working condition. Trust Kwik Kar for your vehicle's brake service maintenance and repairs.

Kwik Kar recommends a brake service any time the symptoms described above occur.

Engine Diagnostic Service

In order to meet Federal Exhaust Emission and Fuel Economy regulations, today's vehicles are equipped with highly sophisticated electronic engine control systems. Your vehicle’s onboard computer receives information from a network of sensors and switches that convert engine operating conditions into electrical signals.

Based on the information and instructions stored in the computer program, commands are then sent to three primary systems:

• Ignition System
• Fuel System
• Emission Control System

and can ultimately illuminate a “check engine” light. About 85% of vehicles on the road have either a check engine light on or some other safety issue such as a broken license-plate light, loose gas cap, a worn spark plug, poor emissions, low transmission fluid or cracked hoses and belts, according to the Car Care Council, a nonprofit consumer-education organization.

The first step to determine the problem behind an engine light is hooking up a scan tool or code reader to an On-Board Diagnostics connector that usually sticks out from under the driver's side of the dashboard.

Fuel Injection Service

If it has been a year or 15,000 miles, your engine could have already built up deposits. Dirt, varnish build-up, corrosion and carbon deposits restrict the flow of air and fuel to your engine. This happens with all fuel-injected vehicles.

The Problem

Deposits in the fuel and air intake system that cause:

• Hard starting
• Stalling
• Rough idling
• Hesitation
• Knocking
• Loss of power
• Poor fuel economy
• Increased emissions
• A need for higher octane gas

The Solution

Completely clean the entire fuel system of deposits:

• Fuel lines
• Fuel injectors
• Intake valves
• Combustion chambers
• Throttle plate and throttle valve

Restore the fuel system to its original design for:

• Maximum performance - easy starting, smooth idling, increased power, eliminate knocking
• Maximun fuel economy
• Minimum emissions

Routine fuel system maintenance helps avoid expensive repairs.

For performance, safety and the life of your vehicle, make sure a Fuel System Tune-up is a part of your normal maintenance schedule.

Timing Belt/Chain Service

Many of today's engines use timing belts, but not all. Some engines use a timing chain and sprocket arrangement. A timing belt is a precision component with teeth that mesh exactly with its mating sprockets. Especially critical is uniformity of the teeth and their spacing. The belt's teeth are precision molded from a special rubber compound for good mesh and long life. The belt's inherent tensile (stretch-resistant) qualities come from high strength cords that run parallel with the direction of belt travel.

Purpose

The timing belt maintains crankshaft-to-camshaft synchronization, keeping valve operation matched to piston position. On some engines, the belt also drives other components. These include the oil pump, water pump, and balance shafts.

The Solution

Check your car's owner's manual for information on timing belt maintenance. Manufacturers generally recommend a certain mileage for belt replacement. If the timing belt is not replaced at the suggested interval, the belt could break, leaving you stranded and possibly causing major engine damage. If you're having the timing belt replaced, consider replacing other parts that may be accessed at the same time. The water pump, timing belt sprockets and tensioning pulleys are good examples. Check with a qualified service technician if you have questions about your car's needs for timing belt maintenance.

Transmission Service

Over 90% of all automatic transmission failures are due to overheating and fluid contamination.

The Problem

Automatice Transmission Fluid (ATF) services are often neglected and even when performed, are often incomplete. This can lead to automatice transmission shifting problems and premature repairs or replacement.

• 90% of automatic tramission failures are due to overheating and fluid contamination.
• A typical transmission drain and refill service replaces only 40% of the old contaiminated ATF.
  • The remainder is trapped inside valve bodies, the torque converter and transmission cooler lines.
  • New ATF from a conventional drain and refill service can often loosen damaging sludge and varnish deposits leading to shift problems and even transmission failure.
  • Automatic transmission replacement can cost $2,000 or more.

The Solution

Take care of you automatice transmission by routinely performing Kwik Kar's Transmission Flush Service. This service utilizes patented equipment and specially formulate chemicals to solve the problems often associated with conventional drain and refill services.

• Removes 95% of the used contaminated fluid.
• A specially formulated Transmission Flush chemical safely removes harmful sludge and varnish deposits which are removed with the old fluid.
• Proprietary conditioning chemicals are added to the new ATF to:
  • Help extend transmission fluid life.
  • Smooth rough or hard shifting problems.
  • Help revitalize seals and o-rings to help stop and prevent leaks.
• Kwik Kar's unique transmission flush equipment carriers both patents and is approved by major vehicle manufacturers.